Book a demo
[02 · Completions]

Deskely WalkdownAI

Punch raised, assigned and closed on the walk, with photos and location.

Book a demo
Commissioning & InspectionSearch...EnglishRS
Walk-downs/WalkdownSubsystem 582-82-01
✦ Location from the drawing
New punchCat A
P-582-0412
Actuator cover missing on 582-XV-820038
Module M12 · Deck 2 · Grid C4
RaiseAssign
Punch on this walkdown5
P-582-0412Actuator cover missingCat ARaised
P-582-0411Cable gland not tightenedCat AAssigned
P-582-0409Tag plate fadedCat BAssigned
P-582-0405Missing insulation at flangeCat BClosed
P-582-0401Support bracket looseCat AClosed

Overview

Walkdown replaces the clipboard and the chat group. Punch items are raised on the walk with a photo, the tag and its location, assigned to the right discipline and tracked until they are closed with evidence.

Walkdown is part of Deskely Build, one of four suites across the life of a project. Every product reads from and writes to the same tag register, so each stage starts with clean data from the last.

Used by walkdown teams, commissioning leads, contractors and client representatives.

What Walkdown replaces.

Punch lists on paper and photos sent by message.

TodayWritten on a clipboard, photographed into a chat group and typed up after the walk.
With WalkdownRaised on the walk with the photo, tag and location, assigned and tracked to closure.
How Walkdown works

From the walk to closure.

What happens to a punch item, from the walk to the signature that closes it.

  1. 01Raise it on the walk

    Take a photo, pick the tag and set category A or B, on a phone or tablet, with or without signal.

  2. 02Located from the drawing

    Pick the tag on the drawing and its module, deck and grid fill in.

  3. 03Assigned and tracked

    Each item goes to the right discipline with a due date, and stays on the tag until it is closed.

  4. 04Closed with evidence

    Contractors close items with a photo of the fix and a signature. Category A items can be set to need client acceptance.

Walkdown keeps the punch on the tag. Your team closes it.

Open category A items hold the certificate for their subsystem.

  1. 1Raised on the walk

    Photo, tag, location and category, captured where the issue is.

  2. 2Held until closed

    Open category A items hold the subsystem certificate until they are closed.

  3. 3Your call

    Contractors close with evidence, and category A items can need client acceptance.

Other products in Deskely Build

Deskely CoreBy DeskelyTag register, ITRs, punch and handover in one system of record.Deskely VerifyBy DeskelyInspection and test records captured in the field and checked as they are signed.Deskely TestpackBy DeskelyTest packs built from the line list and drawings, tracked to reinstatement.Deskely LaunchBy DeskelyA new project built from the EPC handover documents.Deskely ExtractBy DeskelyTurns P&IDs and isometrics into a checked tag register.Deskely DeltaBy DeskelyShows what changed between revisions and everything it touches.

Autonomous engineering runs on Deskely.

Talk to salesBook a demo
Talk to sales