Book a demo
[01 · Engineering]

Deskely ConformAI

Checks bids and the build against spec and code clauses.

Book a demo
Commissioning & InspectionSearch...EnglishRS
Drawing Parser/ConformTechnical bid review
Compliance by section1,284 clauses
1 General requirements100%
2 Process design94%
3 Mechanical88%
4 Piping and valves76%
5 Instrumentation91%
6 Electrical97%
Deviation list✦ 23 found
DEP 31.38.01 §8.2Deviation
Bid offers ASME B16.34 class 150 where class 300 is required.
Evidence: Technical bid vol. 2, p. 148
SPEC-P-003 §4.6Missing
Corrosion allowance not stated for CS piping.
Evidence: Technical bid vol. 2, p. 148
API 610 §6.1.3Compliant
Pump nozzle loads to 2× API table offered. Compliant.
Evidence: Technical bid vol. 2, p. 148

Overview

Conform checks bid documents, and later the build itself, against the client specification and the code clauses that apply, and returns a deviation list with the evidence for every finding.

Conform is part of Deskely Engineer, one of four suites across the life of a project. Every product reads from and writes to the same tag register, so each stage starts with clean data from the last.

Used by bid and proposal teams, technical authorities, quality and compliance engineers and owner's engineers.

What Conform replaces.

Checking compliance clause by clause.

TodayA compliance matrix filled in by hand, one clause at a time, against the bid.
With ConformCompliance by section and a deviation list, with the clause and page behind every finding.
How Conform works

From bid documents to deviation list.

What happens when a bid, or later the build, is checked.

  1. 01Load the documents

    The bid or the build records, with the client specification and the codes it calls up.

  2. 02Checked clause by clause

    Every requirement is matched to what the bid or the build says, and marked compliant, deviating or missing.

  3. 03Compliance by section

    See at a glance which parts of the bid or the build are compliant and which need work.

  4. 04Get the deviation list

    Each deviation with its clause and its evidence, ready for a clarification log or sign-off.

Conform does the checking. Technical authorities make the calls.

Accepting a deviation stays with your technical authority.

  1. 1Checked by Conform

    Every requirement in the specification and the codes it calls up.

  2. 2Flagged for review

    Each deviation or gap, with the clause and the page that misses it.

  3. 3Your call

    Your technical authority accepts it, asks for clarification or rejects it.

Other products in Deskely Engineer

Deskely ExtractBy DeskelyTurns P&IDs and isometrics into a checked tag register.Deskely DeltaBy DeskelyShows what changed between revisions and everything it touches.Deskely ClauseBy DeskelyPulls the clauses that apply to an item from the full spec set into its datasheet.Deskely SubmittalBy DeskelyChecks every vendor submission against spec and register before review.Deskely CoreBy DeskelyTag register, ITRs, punch and handover in one system of record.Deskely VerifyBy DeskelyInspection and test records captured in the field and checked as they are signed.

Autonomous engineering runs on Deskely.

Talk to salesBook a demo
Talk to sales