Book a demo
[01 · Engineering]

Deskely ClauseAI

Pulls the clauses that apply to an item from the full spec set into its datasheet.

Book a demo
Commissioning & InspectionSearch...EnglishRS
Tag Register/ClauseDatasheet 582-PT-820045
Clauses that apply✦ 3 of 48,600 pages
SPEC-I-001 §6.3.2
Pressure transmitters in hydrocarbon service shall be SIL 2 certified, 4–20 mA with HART.
→ Certification / Output
SPEC-M-014 §4.1
Wetted parts in seawater service shall be Super Duplex UNS S32750 or better.
→ Wetted material
SPEC-E-007 §9.2
Field instruments in Zone 1 areas shall be Ex d IIB T4, IP66 minimum.
→ Hazardous area / IP
Conflict: SPEC-E-007 asks IP66, SPEC-E-003 asks IP67 for the same area. Engineer to decide.
Instrument datasheet
Tag582-PT-820045
ServiceLift pump discharge, seawater
Output4–20 mA HART, SIL 2from SPEC-I-001 §6.3.2
Wetted materialSuper Duplex UNS S32750from SPEC-M-014 §4.1
Hazardous areaEx d IIB T4, IP66from SPEC-E-007 §9.2
Range0–25 barg
Accept 3 fieldsOpen spec

Overview

A project specification set can run to 50,000 pages, of which a few paragraphs apply to any one item. Clause finds those paragraphs, pulls them into the item's datasheet with their references, and leaves the engineer to complete and sign it.

Clause is part of Deskely Engineer, one of four suites across the life of a project. Every product reads from and writes to the same tag register, so each stage starts with clean data from the last.

Used by discipline engineers, procurement engineers, package engineers and owner's engineering teams.

What Clause replaces.

Searching the specifications for the clauses that apply.

TodayEvery volume searched by keyword, and the clauses copied into the datasheet by hand.
With ClauseThe clauses that apply to the item, in its datasheet fields, each with its reference.
How Clause works

From specification set to datasheet.

What happens when an item needs its datasheet.

  1. 01Load the specification set

    Client and project specifications and the standards they reference, however many volumes there are.

  2. 02Choose the item

    Pick a tag, an item type or a datasheet. Clause finds every paragraph that applies to it, by service, material, rating and location.

  3. 03Requirements arrive in the fields

    They land in the matching fields of your own datasheet template, each linked to its document, section and page.

  4. 04Check, complete and issue

    Where two specifications disagree, both are shown. The engineer decides, completes and issues the datasheet.

Clause does the searching. Engineers make the calls.

The engineer completes, checks and issues every datasheet.

  1. 1Found by Clause

    The paragraphs that apply to the item, from every volume and referenced standard.

  2. 2Flagged for review

    Where two specifications say different things about the same item, both are shown with their references.

  3. 3Your call

    The engineer resolves it, completes the datasheet and issues it.

Other products in Deskely Engineer

Deskely ExtractBy DeskelyTurns P&IDs and isometrics into a checked tag register.Deskely DeltaBy DeskelyShows what changed between revisions and everything it touches.Deskely SubmittalBy DeskelyChecks every vendor submission against spec and register before review.Deskely ConformBy DeskelyChecks bids and the build against spec and code clauses.Deskely CoreBy DeskelyTag register, ITRs, punch and handover in one system of record.Deskely VerifyBy DeskelyInspection and test records captured in the field and checked as they are signed.

Autonomous engineering runs on Deskely.

Talk to salesBook a demo
Talk to sales